MultiCom Technical Support Forum Index MultiCom Technical Support
Supporting MultiCom Routers, Firewalls and VPN
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

What is the IP address of my MultiCom Firewall ?

 
Post new topic   Reply to topic    MultiCom Technical Support Forum Index -> 3.x Frequently Asked Questions
View previous topic :: View next topic  
Author Message
Support



Joined: 09 Oct 2002
Posts: 175
Location: Lausanne, Switzerland

PostPosted: Wed Oct 09, 02 17:02    Post subject: What is the IP address of my MultiCom Firewall ? Reply with quote

Devices do not have IP addresses, only their interfaces. In that sense there are two or three IP addresses that will reach your MultiCom Firewall: one for the LAN interface, one for the WAN interface, and one for the DMZ (if you have an Ethernet III). Check your Quick Install Guide that came with your product to see the default configuration summary.

The factory default of the LAN interface is 10.0.0.1, subnet 255.0.0.0.
The WAN interface is a DHCP client with no IP address until a DHCP server assigns one to it*.
The DMZ interface, if available, is unactivated.
The PPPoE interface (if used) has no IP address until it is assigned one by your ISP*.

* - this IP address may change according to the policy of your ISP
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    MultiCom Technical Support Forum Index -> 3.x Frequently Asked Questions All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group