MultiCom Technical Support Forum Index MultiCom Technical Support
Supporting MultiCom Routers, Firewalls and VPN
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Do you have any sample telnet/ console commands?

 
Post new topic   Reply to topic    MultiCom Technical Support Forum Index -> 3.x Frequently Asked Questions
View previous topic :: View next topic  
Author Message
Support



Joined: 09 Oct 2002
Posts: 175
Location: Lausanne, Switzerland

PostPosted: Mon Jan 13, 03 18:08    Post subject: Do you have any sample telnet/ console commands? Reply with quote

Below are a list of common activities a user might make on telnet or console. For more information on the commands themselves please refer to the Reference Manual. Italicised text is sample output when available.

MULTICOM SERIAL NUMBER
info system hardware serial_number
serial_number = LI-MU7-CH-0200D2

SOFTWARE VERSION
info system software firmware
firmware = 3.2

LAN STATUS
info interface ethernet LAN status status
status = UP RUNNING

LAN IP ADDRESS
info interface ethernet LAN status ip_address
ip_address = 10.0.0.1
info interface ethernet LAN ip netmask
netmask = 255.0.0.0

LAN DHCP MODE
info interface ethernet LAN ip dhcp mode
mode = server

WAN STATUS
info interface ethernet WAN status status
status = UP RUNNING

WAN DHCP CLIENT STATUS
info interface ethernet WAN ip dhcp client status state
state = Assigned, Disabled, Fail, Try to get Address, Expire, Rebind, Renew (all possible responses)

PPPoE STATUS
info interface ppp PPPoE status status
status = UP RUNNING

PPPoE IP ADDRESS
info interface ppp PPPoE status ip_address
ip_address = 212.147.17.76

PPPoE IPCP INFO
info interface ppp PPPoE ipcp status state
state = UP
state = DOWN


PPPoE LINK STATUS
info interface ppp PPPoE lcp status info
info = "" (which means everything is OK)
info = CHAP authentication failed
info = Timeout sending Config-Requests
info = Endpoint not connected


PPPoE DNS ASSIGNED SERVERS
info interface ppp PPPoE ipcp status primary
primary = 212.147.10.10
info interface ppp PPPoE ipcp status secondary
secondary = 212.147.0.1

AVAILABLE PPPoE SERVERS
info interface ppp PPPoE pppoe server_list
indexes: 0 1 2
info interface ppp PPPoE pppoe server_list 0 access_concentrator_name
access_concentrator_name = ipc-lsp690-r-lc-01
info interface ppp PPPoE pppoe server_list 0 service_name
service_name = Any

ARP ENTRIES
info arp status arp_entry
indexes: 0 1 2
info arp status arp_entry 0 hw_address
hw_address = 00:C0:F0:57:4A:6D
info arp status arp_entry 1 hw_address
hw_address = 00:C0:F0:4C:A7:90

DNS SERVERS USED
info ip dns status nameserver 0 ip
ip = 192.168.1.115
info ip dns status nameserver 1 ip
ip = 192.168.1.116

ENABLE IPSEC
set security ipsec enabled=true
saveconfig current

DISABLE IPSEC
set security ipsec enabled=false
saveconfig current

TURN ON SECUREWALL
set interface ethernet WAN ip nat securewall=true
saveconfig current

TURN OFF SECUREWALL
set interface ethernet WAN ip nat securewall=false
saveconfig current

ENABLE FILTERING
set ip filtering enabled=true
saveconfig current

ENABLE FILTERING OBJECTS
set ip filtering_objects enabled=true
saveconfig current

ENABLE DNS PROXY
set ip dns proxy enabled=true
saveconfig current

DISABLE DNS PROXY
set ip dns proxy enabled=false
saveconfig current

ENABLE RIP
set routing ip rip enabled=true
saveconfig current

DISABLE RIP
set routing ip rip enabled=false
saveconfig current

ENABLE FTP
set ip ftp server enabled=true
saveconfig current

DISABLE FTP
set ip ftp server enabled=false
saveconfig current

ADD SYSLOG SERVER at 10.0.0.2 (assumes there is no other Syslog Server in position 0)
add ip syslog server 0
set ip syslog server 0 address=10.0.0.2 level=debug
saveconfig current
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    MultiCom Technical Support Forum Index -> 3.x Frequently Asked Questions All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group